Two reasons why the glass edging machine is hot and trips during operation

During the operation of the glass edging machine, the motor always gets hot and trips. Consumers of glass machinery have encountered this situation. So how is this phenomenon caused? Our Jugang Shengong Glass Machinery Factory made a rough estimate and made the following two maintenance suggestions: 1. First, smell the motor to see if there is a big burnt smell. If there is, then it can basically be concluded that it is due to the glass. Tripping caused by short circuit of the edging machine motor is not uncommon in glass edging machines. Please remove the motor for inspection and maintenance, or replace it with a new one. 2. If the motor problem is ruled out, then there is a very likely reason that the transmission device of the glass edging machine is not smooth, which causes the motor load to increase, generates heat and eventually causes tripping. This phenomenon requires a thorough inspection of the glass Find out the problem with the transmission device of the edge grinding machine. If it is only due to dust and other reasons, then clean it up and apply some lubricating oil. If the transmission device is damaged, it must be repaired or replaced.
The normal work of glass edging machine comes from the cooperation of parts
In the application of glass machinery, if you want to make it work more smoothly, the cooperation of its parts must be very good. The damage of one part may make the whole machine unable to work, and even cause The quality of glass products is greatly reduced. At present, in the production of glass products, more and more attention is paid to the quality of glass machinery. At present, the bearing transmission of glass machinery is gradually becoming more widely used. Its maintenance cost is low and the first investment is large. In the glass machinery, the glass beveling machine and the glass straight beveling machine adopt a non-chain bearing rolling chain plate structure. The grinding head can be raised and lowered. It is a special equipment for processing the bevel and bottom of various flat glass or lenses. At present, more technology has been put into the application of glass machinery. For the glass beveling machine, its man-machine interface clearly displays various parameters such as glass thickness, bevel width and angle, remaining glass thickness and processing speed. The transmission speed adopts frequency conversion speed regulation. It can be used for grinding the rear plate, and is equipped with an automatic cleaning device for the rear plate.
With technology speeding up in lighting speed, have created quite a name for itself amidst glass processing machines and it happens to have a lot of benefits as well.
Our vision serves as the framework for our glass machine and guides every aspect of our business by describing what we need to accomplish in order to continue achieving sustainable, quality growth.
Guangdong Enkong Machinery Co.,Ltd. is a team of manufacturers who have 10+ year experience on creating business plans and other types of productions with top-tier management firms and various multinational corporates.