(+86)757-27756688

Home  > Info Center  > News  >  Types of glass edging machines

Types of glass edging machines

2022-06-23

The glass edging machine is one of the earliest mechanical equipment produced in the glass deep processing equipment. In recent years, with the continuous development and growth of the glass deep processing industry, the types and specifications of glass edge machines have become more and more, and the technology is becoming more and more advanced, and its functions are becoming more and more comprehensive.

 

How do I choose a model that suits you in a variety of glass edging machines? How to use it correctly and reasonably? It is a general concern for glass processing households. Here we combine the work experience and experience of the quality inspection of glass processing equipment.

 

1. The main types and characteristics of glass edging machine

To choose the edge machine, you must first understand the types and characteristics of the border machine. Because the machine model of the edge machine currently does not have a uniform arrangement specification in China, the mechanical model is no longer listed in this article.

 

1. Single-arm glass edging machine (referred to as single-arm machine)

The biggest feature of alien machines is widely used and at low prices.

The Single-arm glass edging machine can be ground straight, with round edges, duck mouths, but also oblique edges; round workpieces can be ground, and ellipse workpieces can be ground. Elect the mold on the independent suction cup, and use a glass machine to grind some irregular workpieces.

The structure of the glass edging machine is simple, the manufacturing cost is relatively low, so the price is relatively cheap. Generally, it can be bought in about 20,000 yuan in domestic machines.

 

2. Straight wire edging machine

There are three characteristics of the linear edging machine: one is that the purpose is relatively single and can only grind all kinds of linear edges; the other is continuous edging and high production efficiency; third, the flat glass with a larger size can be ground.

The straight-wire edging machine is the variety and specifications of the various types of bordering machines. The difference in the straight lines that can be ground, it can be divided into three types:

 

 Straight edging machine (referred to as straight edge machine)

The straight side machine can only grind the flat bottom side and two angles of the glass, and the number is divided according to the edging head. Generally speaking, the more edging heads, the higher the edging accuracy and production efficiency, and the higher the price of the corresponding machine. The computer-controlled straight-edged machine (generally the number of heads is more than ten or ten)

 

In recent years, there has been a dual-use straight-edge machine that can flatten both the bottom and the 45O bottom edge in the domestic market, and the amount is also more. In addition, there is an edging machine with one or two sets of the bottom of each other, called a multi-class edge machine. This model has more edging heads, generally computer control, and the equipment price is relatively high.

 

 Straight circles (referred to as round border machine)

The round side machine can grind the round edge of the glass, the duck's mouth, etc., which is used more in the processing of furniture and glass.

 

There are also several models such as three, five, six, seven, and nine mills.

 

 Straight beveled edge machine (referred to as a sideline)

The beaming machine is generally used for the oblique edge of 3 ~ 20o. Now, some barriers can also grind 45O beveled.

The sideline machine is divided by the edging head, and there are also models such as seven, eight, nine, ten, eleven, and fourteen grinders.

In recent years, a beveled edge machine that can grind various wave patterns on the glass sloping is called the wavy sloping machine.

 

3. Eliminate the border machine (referred to as the molding machine imitation machine)

Relying on the template to accurately locate the template, it can accurately grind the straight edges, round edges, duck mouth, beveled edge, etc. of the round or alien glass. high.

The use of a special template to use the mold edging side machine. When there are many production varieties, not only the cost of making templates is higher, but also the management and replacement templates are more troublesome. Therefore, this model is suitable for production. Large glass processing.

There are several models such as single, double head, four -headed, six heads, and six heads. There are only more than 10 manufacturers with large scale, stable product quality, complete after -sales service system, and high reputation. When we buy, we must first choose the edging machines produced by these manufacturers. Shangshang is higher than that of small factories, but quality and after -sales service are much better than small factories, and it is more assured to use. Even if some technical problems occur in use, these manufacturers will help you solve it in time. Generally, it is free during the warranty period, and the cost fee is appropriately charged for the warranty period.

If you are not satisfied with the purchased machine and equipment, you can also return or replace it.

In addition, it should be specifically explained that if there are many types and quantities of milling machines you need to buy, it is best to use the same manufacturer to produce. Because doing this is much more convenient for future production, management, maintenance, etc., and because they are purchased in batches, more discounts can be obtained in terms of price and services. The equipment is produced from a few equipment manufacturers.

If the requirements for the edging accuracy of glass products are not too high, you can consider purchasing some small manufacturers to produce bordering machines. This can save investment in purchasing equipment. Because the price of the small factory is relatively cheaper, it can generally be 10 % to 20 % lower than the large factory produced.

If the scale of glass products is large, the funds are sufficient, and the accuracy of glass products is high, and the production batch is large, you can consider purchasing several imported edge machines. Although the importer is expensive, its processing accuracy is high and the failure rate is low. It can play an advantage at a critical moment. Some manufacturers have been used for more than ten years, and the processing accuracy is still higher than that of domestic machines. So in a sense, it is quite cost -effective to buy an importer.

 

4. Internal round edging border machine (referred to as inner circle machine)

The characteristics of the internal circle are simple structure and low price, but the use is relatively single, which is mainly suitable for processing circular peripheral (can be a positive circle, or an oval or alien circle).

The internal circular machines produced by some factories in China have a long swing arm, which increases the swing range of the edging head. This model can not only grind the inner circle, but also the outer circle, also known as the internal and external roundabout machines.

 

5.Straight bilateral edging machine (referred to as bilateral grinders)

The characteristic of bilateral grinders is that two pairs of glass can be grinded at the same time. It has good processing accuracy and high production efficiency. It is suitable for large -scale glass edging edges.

Bilateral milling machines are divided into two types: glasses double edging machine and double -round edge edging machine according to the performance.

Bilateral mills can be divided into two types: small and medium and large. The maximum edging width is below two meters called medium and small bilateral grinders, and the edging head is equipped with four, six, eight, and twelve grinders. The maximum edging width is called large -scale bilateral grinders with a maximum edging width of two meters or more. Large -scale bilateral mills are generally controlled by computer, which is highly automated and suitable for edging large -sized flat glass. However, the price of this device is more expensive.

 

6. Other bordering machines and dedicated edge machines

In addition to the above -mentioned edge machines, there are also some simple structures and single -use -by -edge machines, such as the angle machine, the small round machine, and the polishing machine.

In addition, there are some special -to -border grinders specializing in a certain product, such as car rearcillating mirror edging machines, washbasin edging border machines, etc.

 

7. Imported glasses edge machine

The quality of imported machines is good, high accuracy, and production efficiency and service life are much higher than that of domestic machines. However, the price of imported machines is expensive, generally 3-10 times the price of similar domestic machines.

Imported milling machines are produced more from Italy and the quality is better. In addition, there are also many grinders from South Korea, Taiwan and other places.


Chat Online
Chat Online
Leave Your Message inputting...