The improvement of the diagonal error produced by the glass edging machine

Glass glass edging machine produces diagonal error improvement. In the production and processing of glass products, glass edging machine is widely used and can be said to be indispensable, and there are often some small deviations in the processing technology. , Diagonal error will occur in many cases, but how should we improve this situation?

For the reduction of diagonal error, it can be carried out from the following aspects. The first is the balance of the glass conveying movement, if the glass grinding wheel periodically moves back and forth. In this way, the products processed by the glass edging machine will be uneven and have wavy edges.

Pay attention to the control of the glass grinding wheel without back and forth movement. The product has the right movement with the knife in the longitudinal direction. There are three possibilities:

1. During the glass edging machining process, due to two Uneven cutting force on opposite sides. The clamping force is not large enough, which causes the product to move in the longitudinal direction, which causes the wavy and opposite sides of the glass to be non-parallel during glass edging; Non-parallel refers to the size of the head;

3. The gap between the girder adjusting screw and the adjusting gong female is large, when the centering mechanism is centered. Squeezed by the centering force. The distance between the two beams increases, causing the wave side and the opposite side to be non-parallel.

The generation of the diagonal of the glass glass edging machine is a common problem, but it is also representative. It is difficult to produce based on experience and do not understand the principle of mechanical equipment. It is difficult to analyze the problem and find out the problem. Produce excellent products.