Precautions for using glass edging machine

In the processing of glass products, glass edging machine is one of the most important mechanical equipment in glass deep processing equipment.Use edge grinding machine correctly and reasonably, not only ensures normal production, but also extends the life of the machine, resulting in increased production efficiency.

The following is an introduction by Enkong glass edging machine manufacturers to the key points to note about using the glass edging machine

Using the glass edging machine, we should pay attention to the following points:

First of all, for all kinds of newly purchased edger, be sure to read the instruction manual before use. After understanding the transmission principle of the glass edging machine, the role of various parts, and mastering the maintenance knowledge of the glass edging machine, the machine can be operated.

Next, the spindle has a great influence on the grinding quality of the glass, and the position of the spindle, moving clearance, etc. have been adjusted at the factory. When using, except for entering and leaving ,the rest should not be moved, so as not to affect the grinding quality. In addition, the retracted position of the spindle is not easy to be too large, otherwise the waterproof sleeve is easily damaged, causing water leakage and easily burning the motor.

In attention, the sufficient cooling has a great influence on the grinding effect, that always check the cooling pipe for blockage. In particular, the pipeline of the straight-line glass edging machine is easily blocked by the bristles, and is not easily detected after the plugging, which may cause insufficient cooling to affect the quality of glass edging.