Structural and Characteristic Analysis of Circling Machine

During the transportation of the steel coil, the end of the steel coil needs to be protected by cardboard, and the shape of the plate should correspond to the steel coil. Therefore, a hard support plate is required to form a ring. The existing process adopts manual methods, and the template is cut with a knife , not only low work efficiency, but also prone to accidents. Today, Xiaobian will introduce the structure and characteristics of the rounding machine.

The utility model relates to a rounding machine with adjustable diameter. Ring cutter and pressure roller, the pressure roller is arranged on the inner ring between the cutter and the outer ring, the lower tool of the inner ring and the lower tool of the outer ring are arranged on the support platform, the upper tool of the inner ring corresponds to the lower tool of the inner ring, and the upper tool of the outer ring Corresponding to the lower cutter of the outer ring, the upper cutter of the inner circle, the upper cutter of the outer circle and the pressing roller are all connected with the thread of the upper screw, and the inner and outer lower cutters are connected with the thread of the lower screw. The wheel meshes with the lower driving wheel, the driving wheel meshes with the driving wheel, and the driving wheel is fixed with the motor output end. Tool through hole.

The tool on the inner ring, the tool under the inner ring, the tool on the outer ring, the tool under the outer ring and the roller have threaded holes, and the threaded holes rotate on the upper screw or the lower screw, The cutter on the inner ring, the lower circular cutter, the upper cutter on the outer ring, the lower cutter on the outer ring and both ends of the pressing roller are also provided with inner locking nuts.

The advantages of the utility model are: because the inner ring upper knife, the inner ring lower knife, the outer ring upper knife and the outer ring lower knife are all threadedly connected on the upper screw or the lower screw, so each knife The position of the can be adjusted, and then the radius of the inner and outer circles can be adjusted.