loading

Enkong Glass Machinery specialized in making high-quality glass machine, glass edging machine for global customers. 

Reducing glass laser cutting machine failure need to do this!

Lubrication of parts of laser cutting machine: 1, glass lubrication is one of the effective measures to reduce the mechanical failure f. For this, the first step, to choose the suitable lubricating oil, according to the different conditions of use to choose corresponding relatively suitable for lubricating oil or grease, and master the right amount of lubricating oil, according to the requirement of the equipment to choose the corresponding quality grades and brands. In use, both neither can use lower lubricating grease, also cannot use other types of alternative, of course, can not use inferior grease. 2, reduce unnecessary operational mistakes: first of all, to post the tally and reasonable division of labor between professional tally, clear the corresponding responsibility. Have the responsibility to have pressure, pressure will generate power, so as to work smoothly; Second, must complete the necessary incentive mechanism, rewards and punishments, post spot check in the long-term development. 3, regular equipment maintenance: equipment failure should be handled in time, and according to the requirements of the equipment maintenance. Regular and irregular inspection, timely understanding of the equipment running status, to temporarily appear small fault, should be timely treatment, don't cry because it is a small fault, and it doesn't matter does not affect the use, thus overlook the small fault, the chance of delayed maintenance, led to a greater failure, and even safety accidents. 4, normal workload don't work under load bearing capacity of more than equipment, and within the scope of the equipment bearing capacity using the equipment. To balance the load of machine, add and subtract as uniformly as possible, make the equipment in a relatively flat load change, prevent reducer, lift system fluctuates up and down movement.

GET IN TOUCH WITH Us
recommended articles
Info Center FAQs Knowledge
ENKONGS Glass Double Edging Machine: High-Speed Width Adjustment

In this workshop video, ENKONGS demonstrates the size-positioning mechanism and width adjustment of a glass double edging machine, highlighting an opening and closing speed of 8–16 m/min.
ENKONGS SM22 Glass Edging Machine Installed and Tested in Indonesia
After installation at a customer’s factory in Indonesia, ENKONGS ran an on-site test of the SM22 glass edging machine, and the customer checked the architectural glass processing result.
ENKONGS SM2245CP Glass Edging Machine: Transmission and Polishing Features
In this factory demonstration, ENKONGS introduces the SM2245CP glass edging machine, showing its transmission, pneumatic polishing features and finished glass edges for buyer evaluation.
ENKONGS SYMU12 in India: Two Machines, Different Chamfering Configurations

In this Indian customer-site video, ENKONGS compares two SYMU12 edging machines, one without chamfering and one with it, to explain their different roles in the production process.
Photovoltaic Glass Conveying on an ENKONGS Edging Line in India

In this customer-site video from India, ENKONGS follows photovoltaic glass across roller conveyors and transfer areas, showing how conveying connects with edging and operator handling.
ENKONGS Glass Edging Line at an Indian Customer’s Factory

ENKONGS presents a video tour of an Indian customer’s glass edging line, showing installed equipment, roller conveyors and operator interaction to support equipment evaluation.
Egypt Customer Case: SYM10 High-Speed Round-Edge Edging Line in Daily Production

An Egyptian glass processor runs the ENKONGS SYM10 high-speed round-edge edging line daily for refrigerator partition glass, with precise edging, polishing, and a patented servo-tracking chamfer system that switches between C and R edges.
GlassBuild Europe 2026 Innovation Lounge Highlights Glass Edging Automation
GlassBuild Europe 2026 will be held from October 20 to 23 at Messe Düsseldorf. As one of Europe’s premier exhibitions for glass, window and door industries, this year’s event serves as more than a platform for machinery display. It mirrors a prominent shift across the European market: glass manufacturers are increasingly prioritizing automation, consistent processing quality and reduced reliance on manual operations.
ENKONGS Wishes Partners a Happy National Day 2026

During China’s National Day holiday in October 2026, ENKONGS sent greetings to glass processors worldwide and confirmed that production and after-sales follow-up will resume on schedule after the break.
ENKONGS Mid-Autumn Festival Welfare: Sharing the Festival with Every Team Member




ENKONGS released a factory video explaining what affects glass edging machine durability and precision. The video shows heat-treated cast beams, in-house CNC machining of key parts, and stainless-steel machine design used to keep long-term accuracy.

As an innovator of glass machine, ENKONG will continue to pursue further development from a higher perspective, to set an example to the glass machine industry and build up an everlasting brand!

Professional glass processing machinery manufacturer and international glass equipment exporter.

CONTACT US

TEL : (+86)757-27756688
E-MAIL : sales@enkong.com
WHATSAPP : (+86)13724651837
OFFICE ADD :No.22, Shilong Industry Road, Lunjiao Str.,Shunde Dist., Foshan City, Guangdong, China.
Copyright © 2026 by Guangdong Enkong Machinery Co., Ltd. |
Customer service