Cleaning method and daily maintenance of glass washing machine

The cleaning method of the glass washing machine is the first type: brush cleaning type. After the flat glass is placed on the glass edging machine, the glass is carried by the driving roller into the scrubbing room, and it is scrubbed by the hair brush sprayed with water, and then enters the flushing room. Rinse with water, then enter the air-drying room and use a special high-pressure fan to completely peel off the water film to achieve a dry and clean cleaning effect. This type of glass edging machine is characterized by power saving, but noise. 　 　 The second type: brush cleaning two types After the flat glass is placed on the glass edging machine, the glass is carried by the drive roller into the scrubbing room, and it is scrubbed by the brush sprayed with water, and then enters the flushing room, rinsed with pure water, blown with breeze, plus an electric drying system , To achieve a dry and clean cleaning effect, characterized by more power consumption and low noise. The third type: Ultrasonic cleaning 　 Ultrasonic glass cleaning machine is mainly composed of the following components: Cleaning tank: holding the workpiece to be washed, made of stainless steel, installed with heating and temperature control devices. Adhere the ultrasonic transducer to the bottom of the cleaning tank. Transducer (ultrasonic generator): converts electrical energy into mechanical energy. Piezoelectric ceramic transducer, the frequency and power depend on the specific model. Power supply: the maintenance system of the glass washing machine that provides the required electric energy for the transducer 1. The compressed air from the blower of the air path system is sent to the upper and lower cold air knives and the upper and lower hot air knives and the glass plane through the air divider. The distance can be adjusted. When changing the thickness of the glass, you must pay attention to adjusting this gap. 2. Maintenance of the waterway system 　　 The water used in the cleaning section is used for circulation. The water in the water tank should be replaced every day to ensure that the cleaning water is clean. The water tank and filter device should be cleaned once a month. The water spray can be monitored through the observation hole on the cover of the cleaning section. If blockage is found, stop the pump and open the tank cover, remove the water spray nozzle, and install after cleaning.　　 3. Maintenance of the shunt system 　　 Regularly check the operation of the blower, stop it immediately in case of abnormal sound, and report to the maintenance department for inspection. Clean the filter grid of the air inlet every two months, and keep the blower room clean at ordinary times to prevent dust from being sucked into the air duct and polluting the glass glass washing machine.　

Look at the trends, both economic and consumer, for indications on your Guangdong Enkong Machinery Co.,Ltd.'s staying power.

Guangdong Enkong Machinery Co.,Ltd. is the major glass machine provider. glass processing machines businesses need the right tools at their disposal in order to handle glass machine manufacturer. Enkong Glass Machinery is your best choice.

glass machine are raising the stakes of social marketing, but they also ease the sales process by providing ways for glass processing machines to effectively interact with customers.