What are the efficient working factors of glass edging machine?

What are the efficient working factors of glass edging machine? 1. For all newly purchased edging machines, be sure to read the instruction manual before using it. After understanding the transmission principle of the machine, the functions of various handles, handwheels, electrical buttons, waterway and airway regulating valves, and mastering the knowledge of machine maintenance, you can operate the machine. 2. The quality of the grinding head of the glass edging machine has a great impact on the grinding quality of the glass. The position of the grinding head and the moving gap have been adjusted before leaving the factory. Generally, do not use the rest except the forward and backward grinding heads. So as not to affect the grinding quality. In addition, the retreat position of the grinding head is not easy to be too large, otherwise the waterproof cover will be easily damaged, causing water leakage, and the motor will be easily burned out.

3. Adequate cooling also has a greater impact on the grinding effect. Always check the cooling pipeline for blockage. Especially the pipeline of the linear edging machine is easy to be blocked by the bristles, and it is not easy to be noticed after blocking, which will cause insufficient cooling and affect the quality of edging.

4. The CVT used by the edge grinding machine must be in the open state when adjusting the speed, otherwise the CVT of the edge grinding machine will be easily damaged. Everything has been prepared in advance, and there may be other factors: 1. Manufacturing (process) factors. Although the design is correct, the process and manufacturing conditions cannot meet the design requirements, resulting in various failures of the equipment. Invalidate. Such as cracks in the forging process; incomplete penetration in the welding process, looseness and slag inclusion caused by hot and cold cracks casting; dimensional tolerances and surface roughness of mechanical processing are not suitable; defects in heat treatment processes, such as quenching cracks, tempering embrittlement, hardening Surface structure defects, insufficient hardness, too thin hardened layer; finishing grinding cracks, etc. 1. There is a problem with the quality design of the glass edging machine. For example, although the process of the edge grinding machine is reasonable, because the manufacturing conditions cannot meet the design requirements, various failures of the equipment will cause failure. Cracks during the forging process; the welding process has not been welded in place, hot and cold cracked castings, porosity, slag inclusion; processing tolerances and surface roughness are inappropriate; defects in the heat treatment process, such as cracks, temper embrittlement and hardening Surface defects, hardness, hardened layer is too thin; fine grinding cracks. So how should we choose a glass edging machine correctly? Please click to view the precautions in detail. 2. The material selection factors of the edging machine, the materials used in the parts of the equipment do not meet the technical conditions, and the internal defects of the material are essentially the source of internal stress concentration. Under the action of external load, material defects show high stress and cause some kind of failure. The failure of the material may be caused by improper design and material selection; it may also be caused by defects in the process of cold and hot processing (especially heat treatment) of the blank, and improper installation and debugging. 3. The factors of machine operation and maintenance, first of all, are the monitoring of operating conditions (load, speed, etc.) to see if they meet the specified requirements. In addition, lubrication conditions are also an important factor. Lubrication conditions usually include: whether the lubricant and lubrication method are selected properly, whether the lubrication device and the cooling, heating and filtering system function normally, which is also a daily maintenance problem of a glass edging machine.

One increasingly popular managerial tactic to improve problem-solving performance of glass machine is to increase the connectedness, or what academics call clustering, of the organization

go to Enkong Glass Machinery to get an amazing offer at favorbale price. the glass machine glass processing machines actually works and is worth a try.

Loyalty programs provide an opportunity to learn the preferences of customers and design communication strategies that will resonate with glass machine.

Guangdong Enkong Machinery Co.,Ltd. has developed its range of products around its own market research, which discovers customers' precise needs.