English

(+86)757-27756688

Talking about the grinding wheel determines the accuracy of the glass edger

by:Enkong     2021-03-19

In glass processing enterprises, glass machinery uses the main equipment for glass deep processing. To produce high-quality glass products, it is necessary to have good processing equipment. Therefore, enterprises should be cautious when purchasing machinery and equipment. The glass edging machine is widely used in glass deep processing, and the precision of the glass edging machine depends on the selection of the grinding wheel. Diamond wheels, polishing wheels, and resin wheels are generally used. The order is flat bottom coarse grinding, fine grinding, 45 degree coarse grinding, and fine grinding. Finally, use a polishing wheel and a resin wheel to polish the flat bottom and 45 degrees. Some used or imported diamond wheels can be used for a long time. The loss is very small, and the resin wheel wants to have a greater loss. Therefore, imported grinding wheels are used for grinding a large amount of glass and those with higher requirements. In addition, for a glass machinery factory to survive for a long time, it must make its brand. This brand contains more than the name of a glass machinery factory. It also includes the quality, reputation, corporate culture, social contribution of all the products of this glass machinery factory, and can lead the development of the industry. To

The ventilation and dust removal device of the glass edging machine must be intact and effective

1. Check the equipment before starting work and it must be in normal condition. 2. Operators must wear gloves and masks or dust-proof equipment. Doors and windows in the work area should be closed to prevent silica dust from escaping. The ventilation and dust removal device must be intact and effective. 3. Precautions for inspection before work: (1) The compression nut of the grinding wheel must not be loosened; (2) The grinding wheel must not have cracks or gaps; (3) The safety cover is fully assembled and reliable; (4) The front and rear, up and down transmission handles are flexible in operation and during operation. No noise. 4. When the steel plate is edging, the adjustment size of the grinding wheel should be strictly controlled, and the grinding amount should not be too large at a time, so as to avoid the steel plate being worn out and the grinding wheel broken. 5. If there is a failure during plate grinding, such as the steel plate is stuck, the main switch should be turned off immediately, and the steel plate should be taken out after stopping.

6. During production, always pay attention to check whether the motor generates heat and runs abnormally.

7. Stack steel plates (especially cold-rolled plates and oil plates) neatly, not skewed, not higher than 1.2 meters and colliding with each other to avoid slipping and hurting people. 8. Feeding and transporting steel plates should be held firmly and upright, and they should not be littered to avoid injury. 9. When the ventilation and dust removal device fails, stop working or take measures.

10. After the work is finished, close the switch and do the cleaning work.


Guangdong Enkong Machinery Co.,Ltd. has created a professional team which contained with a numbers of engineers and technology experts.
We believe our capacity can give you an impressive experience by using glass machine.
Consistency and simplicity go hand in hand. That means aligning Enkong with the right platforms, speaking to the right customers with the right message, and selling the right idea.
We attach a great importance to domestic market and knows the importance factors of manufacturing glass machine, such as producing methods, etc.
What Guangdong Enkong Machinery Co.,Ltd. discovered was that innovation occurs when business models match up with one or more of the glass machine where technological advances overlap with market needs, thus resulting in growth and transformation.
Custom message
Chat Online
Chat Online
Chat Online inputting...