Some precautions for starting the glass edging machine

1. Check the equipment before starting work, and the glass edging machine must be in normal condition. 2. Operators must wear gloves and masks or dust-proof equipment. Doors and windows in the work area should be closed to prevent silica dust from escaping. The ventilation and dust removal device must be intact and effective. 3. Precautions for the inspection of the glass edging machine before work: (1) The pressing nut of the grinding wheel must not be loose; (2) The grinding wheel must not have cracks or gaps; (3) The safety cover is fully assembled and reliable; (4) Front and rear, up and down transmission handle operation Flexible, no noise during operation. 4. When the steel plate is edging, the adjustment size of the grinding wheel should be strictly controlled, and the grinding amount should not be too large at a time, so as to avoid the steel plate being worn out and the grinding wheel broken. 5. If the glass edging machine fails during edging, such as the steel plate is stuck, the main switch should be turned off immediately, and the steel plate should be taken out after stopping. 6. During production, always pay attention to check whether the motor generates heat and runs abnormally. 7. Stack steel plates (especially cold-rolled plates and oil plates) neatly, not skewed, not higher than 1.2 meters and colliding with each other to avoid slipping and hurting people. 8. Feeding and transporting steel plates should be held firmly and upright, and they should not be littered so as not to injure people. 9. When the ventilation and dust removal device fails, stop working or take measures. 10. After the work is finished, close the switch and do the cleaning work.

What are the specific characteristics of the timing belt of the glass edging machine?

In a mechanical equipment, if the effect is very good, then some of its auxiliary accessories are also very important. It is because of its specific characteristics that they can be used together to make this mechanical equipment so good. The glass edging machine is such a mechanical equipment, so what are the specific characteristics of the glass edging machine timing belt? 1) The transmission is accurate, there is no slippage when working, and it has a constant transmission ratio.

2) Smooth transmission, with buffering and vibration reduction capabilities, and low noise.

3) The transmission efficiency is high, up to 0.98, the energy saving effect is obvious, the maintenance is convenient, no lubrication is required, and the maintenance cost is low. 4) The speed ratio range is large, generally up to 10, and the linear speed can reach 50m/s, with a large power transmission range, up to several watts to several hundred kilowatts. 5) Compared with V-belt transmission, the pre-tightening force is smaller, and the load on the shaft and bearing is smaller. 6) It can be used for long-distance transmission, and the center distance can reach more than 10m.

Whether it's automation or artificial intelligence, the rapid convergence of technology and business often determines glass machine’s competitiveness.

If you are interested in , click Enkong Glass Machinery to see some items with features that you will be amazed at.

While buying the products, make sure that you purchase them from a reputed and trusted seller - either online or offline. Guangdong Enkong Machinery Co.,Ltd. is specialised in the field of , offering a wide range of products like glass machine, glass processing machines, glass machine manufacturer,etc.

Establish a unique brand as Enkong that cuts through the clutter, and you'll get you the capital you need to get moving.