Prolong the service life of glass cutting machine essential three methods

If you want to prolong the service life of glass cutting machine, so regular maintenance is indispensable. So the key is how do we maintain cutting machine and cutting tool? Give you three remind sharp front glass machinery. 1. Open shaped glass cutter into the water tank, water tank, water pump, clear the dust on the pump. Clean water tank, replace circulating water, return water pump to water tank, the connection pipe inserted into the inlet of the pump, clean all connectors. Feed water pump power alone, 3 - operation 5 minutes. 2. Cleaning fan shaped glass cutting machine long-term use can make fan fan inside accumulate a large amount of solid particles, the fans a lot of noise, is not conducive to the exhaust and deodorization. When fan smoke inhalation and no freedom, turn off the power supply first, remove the inlet pipe and the exhaust fan, eliminate the dirt of the fan, then the fan is upright, and remove the wind fan blade, until clean, then install the fan. 3. Clean lens shaped glass cutting machine laser glass cutter edge to wipe the lens center rotating, and assembled three lens needs from the frame, in the same way to wipe. After wiping, the lens can be restored to its original state.

Guangdong Enkong Machinery Co.,Ltd. are maintaining a consistent bottom-line profit and that you've shown steady growth over the past few years.

Guangdong Enkong Machinery Co.,Ltd. will make a healthy profit for its owners and provide a rewarding work environment for its employees.

glass machine receives the updates through industry associations, internal legal counsel, regional associations and legal publications.

glass machine manufacturer problems are nothing new, almost every one of us have to go through them at some point of our lives and some of us never get rid of them. with the development of glass processing machines technology, now provides a perfect cure for that.