Long lasting glass beveling machine for sale xm351a series for polishing

In the manufacture of Glass, Glass cutting is a very important process, at present, glass cutting machine using artificial feeding, cutting efficiency is low, because of the need to cut different sizes of Glass at the same time, fixed on the cutter positioning block can't meet the need, workers tend to judging by experience, prone to error, Glass cutting damage and waste of resources, the next Enkong glass cutting machine suppliers of small make up will take you to understand the cause of the popular glass cutting machine and operation points for attention.Factors that make glass cutting machine popularIn the existing technology, rectangular glass cutting machine is often done in the horizontal and vertical direction, the more common are separate cutting, driven by hydraulic device, so the whole operation process is very unstable, low efficiency, the cutting device will be very big, covers an area of big, consumption of large, therefore, need a cut rectangular glass cutting machine, easy to operate.Rectangular glass cutting machine by derrick installed on the ceiling, the entire unit, directly above the glass conveyor belt it will cut the glass on the right side of the cutting machine, start the rotary motor, drive the slider through transmission block rotation, because in front of the rotating rod connected to the rectangular connector and slide block rotates, the slider can move vertically on the slider.Including two fixed slide rail rectangular glass cutting machine, horizontal slide block and transmission device, two parallel fixed slide rail, both ends fixed crane tower, on both ends of the sliding block with a hollow sliding block, a hollow sliding block can slide on the slide block set, two fixed slide rail and install a diagonal on the diagonal, between two installation incline hoist.When the slider rotates in place, the rotating rod will rotate when moving back and forth in the slider. The spring ensures that the rotating rod moves more smoothly, and the track of the slider ensures the left and right sides of the rectangular glass. When the slider runs to both ends of the slider, the rotating rod drives the slider to move horizontally along the direction of the slide rail to ensure the levelness of the upper and lower sides of the rectangular glass.Operation matters of glass cutting machineThe glass cutting machine comprises a shell of the worktable, the worktable can be sliding set on the shell, the worktable is provided with a magnet, the cutting device is provided with a water pipe, the cutting machine also includes a driving sliding table drive, drive the gear rack, the gear is covered on the shell, fixed on the shelf of the worktable.The gear is provided with a rotating shaft, the rotating shaft extends out of the shell, and is connected with the rotating handle, the shell is provided with a sliding groove, the working table is provided with a guide rail, the sliding groove and guide rail, is helpful to improve the stability of the sliding table.The use of a matching cutting disc groove on the workbench, so that the bottom of the blade into the workbench groove, effectively achieve the cutting of the glass, the workbench has a magnet, magnet block and the workbench fixed by magnetic force, the position of the magnet block can be adjusted according to the different size of the glass cutting positioning, simple operation.The operation of the glass cutting machine should pay attention to the problemThe glass cutting machine comprises a worktable, a base is provided below the worktable, one side of the worktable is provided with a control component, a supporting rod is provided above the worktable, the supporting rod is provided with a shell, a motor is provided below the shell, the output shaft is connected with the motor drive, the output shaft is covered with a cutting wheel.The shell is provided with a water tank, the outer circumference of the motor is covered with a plurality of water pipes, the water tank is provided with a water pump, the water tank is connected with the water pipe, when the motor needs heat dissipation, the water pump control water circulation in the water pipe, fast heat dissipation, improve the practicability of the glass cutting machine.Two spray parts are arranged on the output shaft, two spray parts are connected with a fixed rod, two fixed rod is connected with the connecting pipe, the spraying part comprises a sleeve, the sleeve center is provided with a bearing, the output shaft through the bearing, the gear is installed on the bearing.When the table needs to be cleaned, when the pump control two sleeve, connecting pipe from the nozzle of the corresponding tube seat into the water, gear rotation, can continue to move the gear fixing block, so that the nozzle in a torsion spring swing, before and after the nozzle can clean the surface of the table, improve the practicality of the glass cutting machine.For more information about glass cutting machine, please follow Enkong glass cutting machine suppliers.

Glass has long become an indispensable part of social development, and its necessity is no less than that of daily necessities such as electricity and water. The requirements for glass cutting machines have gradually shown a continuous upward trend, and the production and manufacturing types of similar industrial equipment on the sales market are more diverse. It is overwhelming to choose more diverse, but it is also more difficult to choose. The standard lacks a more delicate unity, and the unevenness of good and bad has become a big problem for customers without work experience. As the saying goes, buying is not as good as selling. Smart.　　Enkong Glass Machinery suppliers briefly introduces the basic knowledge of glass cutting machine selection in several aspects in detail here, and share it for everyone's reference.Tips for choosing glass cutting machine　　 1. To ensure the safety factor, the safety factor of industrial equipment is the basic criterion for the company to purchase machinery and equipment. Only with safety can the production and manufacturing be ensured, and only then can the employees use the processing plant as a safe and stable work at home, and this company can do better.2. It is the adaptability of the glass cutting machine. Because there are more places to install or need glass, and the required specifications are various, so it is to buy mechanical equipment that can be flexibly operated in actual size, so that one equipment can integrate different glass The specifications can save the cost of machinery and equipment, and even save the cost of premises.　　 3. It’s better to take a look at it, the operation process, and the actual effect. Facts speak louder than words.　　4. Before purchasing a glass cutting machine, you must consider whether your product structure is a suitable glass cutting machine;　　5. The size of the glass cutting machine takes into account whether the indoor space can be placed; the basic glass cutting machine is generally 18 meters long and has a total width of 3.5 meters;　　6. Are there any aerial cranes in the glass production and processing industrial plant, which are used to transport the glass above all the pieces of table?　　7. When purchasing a glass cutting machine, be sure to conduct a careful investigation on the loading table.Tips for buying a second-hand glass cutting machine1. Ensure the safety factor        The safety factor of mechanical equipment is the basic standard for enterprises to purchase mechanical equipment. Only with safety can production be guaranteed and workers can treat the factory as a home and work safely and stably, so that the company can do better and better.2. Adaptability of second-hand glass cutting machine       Because the installation or the place where there is more glass, the specifications are again required, because this is the best, the actual operation level of the flexible machine, this equipment can be integrated into different glass specifications, It can save machine cost, even cost.3. Consider the suitability of product structure and cutting machine        Before choosing a second-hand glass cutting machine, you must consider whether your product structure is the correct choice of glass cutting machine;4. Pay attention to the size of the glass cutting machine       Consider whether the indoor space can be placed; the basic glass cutting machine is generally 18 meters long and 3.5 meters wide.5. Whether the workshop equipment is complete       Does the glass production and processing industrial workshop have a hoisting machine that transports glass to the upper pallet?6. Check the loading table carefully       When choosing a second-hand glass cutting machine, you must carefully study the upper plate.Reasons for the different depths of glass cutting machine cuttingThe different shades may fall into the following categories:　　 1. The cutter wheel or hole is not round, which causes periodic flip and bounce.　　The poor cutting caused by this kind of situation is mainly manifested in the regular one-depth and one-shallow cutting lines of laminated glass, which can be replaced with stronger shaft tenon processing.　　 2. The regional cutting depth caused by the unevenness of the cutting cabinet countertops is too shallow or too deep.　　 This kind of situation can generally regard cutting cabinet countertops as a nine-square grid. Look at the square where the problems often appear when cutting, then the cabinet countertops in this area are uneven. The more economical solution is to replace it with a toothed cutter wheel.Preventive measures for glass cutting machineThe failure maintenance of the glass cutting machine is of course important, but in daily use, it is better to take preventive measures. Generally there are the following points:　　1. regular maintenance　　 The failure of the glass cutting machine must be dealt with in time, and various maintenance and repairs must be carried out according to the equipment requirements. Regular and irregular inspections, keep abreast of the operating conditions of the glass cutting machine, and deal with temporary minor faults in a timely manner. Do not delay the maintenance opportunity due to minor faults and do not affect the use, leading to larger faults or even safety accidents .　　2. normal working load　　 Be careful not to work under a large load that the equipment can withstand, and use the equipment within your ability. It is necessary to balance the uniform increase and decrease of the machine load as much as possible, so that the equipment is in a relatively gentle load change, and prevent large ups and downs of the reducer and lifting system.　　3. Lubrication of various parts of glass cutting machine　　Lubrication is one of the effective measures to reduce mechanical failure. For this reason, it is necessary to select lubricants reasonably, choose corresponding lubricating oil or grease according to different application conditions, and master the appropriate quality oil quantity, and select the corresponding quality grade and brand according to the requirements of the equipment. In use, neither low-grade lubricating grease nor other types of lubricating grease can be used as a substitute. Of course, inferior lubricating grease cannot be used.　　4. The division of responsibilities of the operators to reduce failures　　 First, make a reasonable division of the post inspection and inspection according to the requirements of the inspection and repair system, and then clarify the corresponding responsibilities. When there is responsibility, there will be pressure, and when there is pressure, motivation will be generated, and work will be carried out smoothly. Secondly, we must formulate necessary incentive mechanisms to reward the good and punish the bad, so that the post inspection can develop in the long run.For more knowledge about glass cutting machines, please contact Enkong Glass Machinery suppliers.

Glass has good perspective, pervious to light performance, the advantages of higher chemical stability, glass machine is specialized in the production of a variety of glass mechanical equipment, and synchronous belt is an indispensable part of the glass machine, so synchronous belt in the glass machine is how to apply? This article is made up of a series of synchronization belts common used by Enkong glass machine Suppliers.Application of timing belt on glass machineThe main characteristics of synchronous belt transmission are: (1) accurate transmission ratio, high transmission efficiency, small initial tension force, small force on the shaft; (2) Large transmission ratio and linear speed range; (3) Uniform instantaneous velocity; The power transferred by unit mass is larger; (5) can be freely variable speed, simple structure, easy to replace, suitable for the two shaft center apart from the larger transmission occasions; 6 transmission smooth no noise, buffering, vibration absorption; Have overload protection function, can prevent the damage of weak parts, play a role of safety protection.The main applications of glass production line are: roller drive, acceleration and reduction roller drive, cross cutting machine tool box movement, slice machine transport, horizontal stacking machine movement, etc.The synchronous belt has many advantages, such as large driving power, stable operation, low working noise, no lubrication, etc., so different belt types should be selected according to different use requirements of glass machine. When the transmission efficiency is high, the transmission ratio is accurate, the transmission shaft force is small, generally chooses the trapezoidal gear synchronous belt more. And when the transfer power is large, to reduce wear belt and belt teeth, the arc tooth belt is used more. The selection mainly looks at the following several aspects of the use of requirements: transmission power, transmission torque, transmission ratio, transmission or transmission speed, transmission or transmission frequency, transport goods, service environment, service life, replacement conditions.For example, in the cold-end roller transmission of glass production line, the transmission belt has higher requirements. Although it does not have lubrication conditions, it is required to run smoothly, have low speed, low torque required, low noise, and have certain wear resistance. So not only to be able to transmit the set power, accurate transmission ratio, but also to ensure durable, long service life. Select the rubber arc gear synchronous belt can be very good to improve its performance.What are the deep processing steps of glass1. Selection of original pieces: First of all, glass processing must have original pieces of glass. Ordinary glass processing plants do not produce original pieces, only large glass companies can produce original pieces, such as Xinyi Glass, Nanbo Group and other large companies can produce. The thickness of the original glass is not the same, if it is the production of display glass generally choose 1mm, 2mm, 3mm between the thickness, because of the digital products on the requirements of light transmission is higher, so will choose super white glass.2, glass size cutting: the size of the original piece itself is very large, generally more than 3 meters long, more than 2 meters wide. Cutting is the first step in glass processing. The staff calculates how to cut the original piece according to the size on the customer's drawing. The algorithm must take into account the size consumed by the rear glass mo side. Hence the term tolerance.3, glass edge chamfer: just cut the glass will scrape the hand, the glass edge will be very sharp, the customer will also require the edge, but the edge has fog edge and bright edge, installed in the frame of fog edge on the line, this can also reduce the cost, polished edge is those on the glass aesthetic requirements of high customers. After the edge grinding is chamfering, chamfering also has special chamfering machine, through the chamfering function to accurately pour the desired R Angle.4, toughening: there are physical toughening and chemical toughening, we talk about physical toughening here, physical toughening is the glass in the furnace to heat up to a certain degree, and then cool down, glass toughened hardness enhanced. Customers will require the glass to be tempered so that it is safe. Tempered glass is also known as safety glass.5, Silk screen printing: some glass will go through this step, because the customer wants to print some patterns, company logo, etc on the glass. There are also high temperature silk screen with low temperature silk screen, high temperature silk screen will be in the previous step of tempering. Screen printing room to be relatively clean. This ink will not be mixed with impurities. The effect of screen printing will be better.6, cleaning test packaging: the back of the glass to pass the inspector's detection to pass, the glass will be selected to have problems, some waste, some can be underprocessed. Good glass is laminate through laminating machine, and then wrapped in kraft paper.For more information about Glass Machine, please contact Enkong glass machine Suppliers.

Due to the epidemic situation of covid-19, most industries will be affected, and glass machinery will inevitably be affected by covid-19. The following is a look at the current situation of China's glass machinery industry with Enkong glass machine manufacturer.Current situation of glass machinery industry After nearly two decades of growth, China's glass machinery industry began to show a downward trend in the second half of last year, with growth slowing down. More than a decade ago, the glass machinery industry was aiming for mid - and low-end equipment. Now it is aiming for the high end. The change of purpose heralds a new stage for the glass machinery industry. Along with our country gradually from the factory of the world to manufacturing across the world, on which the past more than ten years high speed development of the growth rate of the key factors changed, the characteristics of the glass machinery industry characterized by two aspects: one is the demand of clear cut and demand to accelerate the upgrading of industrial structure, the second is the high-end models into the industry's attention hot spot, the depth of the glass machinery industry transformation is imminent. After more than a decade of statistical data analysis, China's glass machinery industry after more than a decade of continuous growth, in the second half of last year, the growth rate began to decline, the growth rate of output also slowed down significantly. From the perspective of industry structure, more than a decade ago, the glass machinery industry focused on medium and low grade equipment with high growth rate. Now, the glass machinery industry focuses on high-end equipment. The change of the focus indicates that the glass machinery industry has reached a new stage. The achievements of the glass machinery industry in the past decade are summarized as follows: first, the rapid growth of economic planning, until last year China became the first in the world, which is a change from small to big; Second, in the advanced equipment from the fundamental completion of the leap from the impossible to do, from scratch development; Third, the quality of enterprises has been generally improved, and a number of excellent enterprises with market competitiveness have emerged. At present, the glass machinery enterprises in our country are facing the current situation that the total demand is greatly reduced and the industrial structure of demand is accelerating. Affected by this, our country glass edge grinding machine industry demand has decreased, and at the same time, the industry inherent industrial structure imbalance is more obvious, the already severe industry homogenization competition. Matters needing attention in the future development of glass machinery Glass machinery manufacturing equipment and its automation can reduce the consumption of manual labor, improve production efficiency and production quality, ensure the safety of production, enhance the core competitiveness of enterprises in the market, and input new vitality for the development of many industries. Relevant personnel also need to further strengthen the study, can make automation equipment and machinery manufacturing toward intelligent, templates, greening, digital direction development, to provide a steady stream of power for social and economic development, as well as glass machinery equipment under the background of application of electronic information technology, should pay attention to the characteristics of the following aspects. Machinery manufacturing equipment automation development in four directions 1) intelligence. Intelligentization is the inevitable development trend of glass machinery manufacturing equipment and its automation. Intelligentization is the use of advanced computer technology to simulate the human brain, to optimize and improve the mechanical equipment, mechanical equipment to add judgment and thinking ability. Intelligentization fully shows the integration of human and computer, improves the degree of human-computer interaction, and thus promotes the improvement of production efficiency. Relevant staff in glass design automation machinery manufacturing equipment and process, need to learn positive psychology, behavioral science, operational research, and many other academic knowledge, in the field of the human's thinking mode is simulated, guarantee products can have the ability of independent thinking and decision-making, finally realizes the expected set targets. 2) template development. The development of glass machinery manufacturing equipment and its automation can meet the internal requirements of product functions in many industries. In the process of designing new products, relevant staff need to ensure that the expansion of production scale and strengthening of product standard units are carried out simultaneously. Because the structure and components of mechanical equipment are very complex, in order to reduce the consumption of manual labor, it needs to be divided into many plates, thus reducing the production time. 3) go green. At present, China is actively implementing the strategy of sustainable development, which requires that contemporary development should not harm the interests of future generations. In the development of glass machinery manufacturing equipment and its automation, it is also necessary to integrate the concept of sustainable development and improve the greenness of glass machinery manufacturing equipment. In the past, due to people's poor attention to this, the glass machinery manufacturing equipment caused serious damage to the environment. Therefore, in the future development of glass machinery manufacturing equipment and its automation, the protection of ecological environment will be strengthened and the contradictory relationship between environment and development will be coordinated. 4) digitization. Digitization is also an important direction of glass machinery manufacturing equipment and its automation development, because of the development and popularization of information technology and network technology, digital technology will become the core content of glass machinery manufacturing equipment technology. The digital processing of many information content in the enterprise for effective and timely transmission, so that enterprises can quickly adapt to the changes in the economic market. Digital technology can enhance the collection and processing of information data in the system. Digital manufacturing technology can be said to be a comprehensive integration of glass machinery manufacturing equipment technology, computer technology, network technology.