How to set up a glass cutting machine speed

Before cutting, glass cutting machine can be set by the operation of cutting speed, in order to achieve the better cutting quality, different running speed between a suitable cutting speed range, the range can be selected according to equipment illustrate or use the test to make sure, because the thickness of material itself, material is qualitative different, high or low melting point, thermal conductivity size and the factors such as the surface tension of the melt after, cutting speed and the corresponding change. The following glass cutting machine co. , LTD on the operation of the CNC cutting machine speed setting to do a simple introduction, hope can provide some reference for you. 1, moderately increase the cutting speed can improve the quality of incision, namely a slightly narrow incision, incision surface more smooth, and can reduce the deformation. 2, cutting too fast makes the cutting line energy is lower than the required quantity, slitting cutting jet will be fast enough to melt in the melt blowing off immediately after to form a larger amount of drag, accompanied by incision, hang slag notch surface quality decline. 3, when the cutting speed is too low, due to the anode is the plasma arc cutting, in order to maintain the stability of the arc itself and the anode spots or anode area must near the nearest arc cutting seam find conduction current place, at the same time to jet flow of radial transfer more heat and thus make the incision width and incision on both sides of the molten material in bottom flange and solidified, form is not easy to clean, hang slag and incision on the edge formed by heat melt too much rounded corners. 4, when the speed is very low, because of the wide incision arc may even go out. Thus, good cutting quality and cutting speed are inseparable.

Nowadays, the adoption of glass machine in glass machine manufacturer industry is quite common.

To build customers value by delivering high-quality products, services and solutions in innovative and cost effective ways. Guangdong Enkong Machinery Co.,Ltd. will realize this mission by setting the highest standards in service, reliability, safety and cost containment in our industry.

In various different types of glass processing machines, glass machine manufacturer glass machine is one of the most commonly used.

To find a qualified at reasonable price, contact Guangdong Enkong Machinery Co.,Ltd. at Enkong Glass Machinery, a professional provider and tell them what you envision for your glass machine.