loading

Enkong Glass Machinery specialized in making high-quality glass machine, glass edging machine for global customers. 

Glass machinery can accurately process glass and three-dimensional graphics

Since the cracks in the glass are accurately drawn along the glass machine, the separation caused by the glass machine can cut out a very accurate picture of the glass. In fact, the experiments we have done have also proved that glass machining can complete the setting pictures successively and accurately, regardless of the straight line or the glass, and the repetition is high. Therefore, glass machinery can accurately process glass and three-dimensional graphics. The processing thickness and processing speed of glass machining have three factors that limit the processing speed, the thickness of the glass, the thermal expansion coefficient of the material, and the output power of the glass machinery. Linear processing at a speed of 0.5 m/s. For comparison, the hard metal wheel can process the same glass of the same thickness at a speed of 1.5 m/s. However, even in the use of speed, this difference will be compensated by the economic and quality advantages brought by glass machining. At the same time, we all believe that further optimization of the processing process and selection of higher output glass machinery for processing will easily increase the processing speed by two to three times.

Glass clamping and conveying device of glass edging machine

Glass clamping and conveying device of glass edging machine. It includes an upper pressure beam, the upper pressure beam is matched with a pressure beam adjustment unit, a timing belt tensioning unit and a timing belt compression guide unit, the upper pressure beam is fixed relative to the pressure beam adjustment unit, and the pressure beam adjustment unit It is fixed relative to the base, and a timing belt is arranged on the upper pressing beam, and the timing belt is connected with the gear transmission unit. When the utility model is used, it is convenient to adjust the height of the upper pressure beam through the pressure beam adjustment unit, and the tension degree of the timing belt is adjusted by the timing belt tension unit. The adjustment accuracy is high, which is convenient for glass transmission and reduces the glass in transmission. The breakage rate.

However, with the increased prevalence of glass machine, it has become far more affordable.

Get cost effective and professional glass machine manufacturer advice for your solution at Enkong Glass Machinery. Guangdong Enkong Machinery Co.,Ltd. expert is your first choice!

Do you want to find a provider to get your glass machine problem settled? If so, we suggest that you give a shot to Guangdong Enkong Machinery Co.,Ltd.. Visit Enkong Glass Machinery to learn more and contact us.

GET IN TOUCH WITH Us
recommended articles
Info Center FAQs Knowledge
ENKONGS Glass Double Edging Machine: High-Speed Width Adjustment

In this workshop video, ENKONGS demonstrates the size-positioning mechanism and width adjustment of a glass double edging machine, highlighting an opening and closing speed of 8–16 m/min.
ENKONGS SM22 Glass Edging Machine Installed and Tested in Indonesia
After installation at a customer’s factory in Indonesia, ENKONGS ran an on-site test of the SM22 glass edging machine, and the customer checked the architectural glass processing result.
ENKONGS SM2245CP Glass Edging Machine: Transmission and Polishing Features
In this factory demonstration, ENKONGS introduces the SM2245CP glass edging machine, showing its transmission, pneumatic polishing features and finished glass edges for buyer evaluation.
ENKONGS SYMU12 in India: Two Machines, Different Chamfering Configurations

In this Indian customer-site video, ENKONGS compares two SYMU12 edging machines, one without chamfering and one with it, to explain their different roles in the production process.
Photovoltaic Glass Conveying on an ENKONGS Edging Line in India

In this customer-site video from India, ENKONGS follows photovoltaic glass across roller conveyors and transfer areas, showing how conveying connects with edging and operator handling.
ENKONGS Glass Edging Line at an Indian Customer’s Factory

ENKONGS presents a video tour of an Indian customer’s glass edging line, showing installed equipment, roller conveyors and operator interaction to support equipment evaluation.
Egypt Customer Case: SYM10 High-Speed Round-Edge Edging Line in Daily Production

An Egyptian glass processor runs the ENKONGS SYM10 high-speed round-edge edging line daily for refrigerator partition glass, with precise edging, polishing, and a patented servo-tracking chamfer system that switches between C and R edges.
GlassBuild Europe 2026 Innovation Lounge Highlights Glass Edging Automation
GlassBuild Europe 2026 will be held from October 20 to 23 at Messe Düsseldorf. As one of Europe’s premier exhibitions for glass, window and door industries, this year’s event serves as more than a platform for machinery display. It mirrors a prominent shift across the European market: glass manufacturers are increasingly prioritizing automation, consistent processing quality and reduced reliance on manual operations.
ENKONGS Wishes Partners a Happy National Day 2026

During China’s National Day holiday in October 2026, ENKONGS sent greetings to glass processors worldwide and confirmed that production and after-sales follow-up will resume on schedule after the break.
ENKONGS Mid-Autumn Festival Welfare: Sharing the Festival with Every Team Member




ENKONGS released a factory video explaining what affects glass edging machine durability and precision. The video shows heat-treated cast beams, in-house CNC machining of key parts, and stainless-steel machine design used to keep long-term accuracy.

As an innovator of glass machine, ENKONG will continue to pursue further development from a higher perspective, to set an example to the glass machine industry and build up an everlasting brand!

Professional glass processing machinery manufacturer and international glass equipment exporter.

CONTACT US

TEL : (+86)757-27756688
E-MAIL : sales@enkong.com
WHATSAPP : (+86)13724651837
OFFICE ADD :No.22, Shilong Industry Road, Lunjiao Str.,Shunde Dist., Foshan City, Guangdong, China.
Copyright © 2026 by Guangdong Enkong Machinery Co., Ltd. |
Customer service