Electrical performance requirements of glass edging machine

The electrical performance of the glass edging machine must meet the following requirements. 1) The graphics and text display on the display screen or display should be clear, complete and reliable. 2) The operation keys on the operation panel should be sensitive and reliable. 3) Each travel limit switch works reliably. 4) All electrical circuits should be placed in the wire slot in a standardized way, and the wiring should be accurate and well marked.

5) The grounding insulation resistance of the equipment is greater than or equal to 1 ampere.

6) The electrical system safety complies with the regulations of GB5226.1.

The whole machine requirements of the glass edging machine

For the complete glass edging machine, the following requirements should be met. 1) The manual and automatic operating parts of the equipment should be portable, accurate and reliable. 2) Each movement mechanism should be accurate, reliable, stable in movement, and there should be no obvious vibration, impact, and crawling. 3) The cooling pump and lubrication pump should work normally, and the pipeline system should not be blocked or leaked. 4) The bearing part of the grinding head should not exceed 45 degrees Celsius, and the maximum temperature should not exceed 85 degrees Celsius. 5) The noise of the whole machine is less than or equal to 85dB(A).

What should I do if the glass edging machine alarms?

I believe that many customers will have encountered the problem of the alarm sounding of the glass edging machine for unknown reasons. In fact, these are minor problems. If everyone can self-check to find out the problem and solve the problem, then everyone There is no need to wait anxiously for the sales and service personnel of the machine manufacturer to come, and the production will be smoother. Let me introduce how to troubleshoot the alarm. 1. AL007 motor overspeed alarm, first check whether the machine is stuck and whether the speed is overspeed.

2.AL009 Position deviation alarm, same as above.

3. AL006 overload alarm: check whether the power line UVW is connected; check the machine. 4. AL011, AL024; AL028; AL026 coding signal alarm, first check whether the motor parameters match, then check or replace the coding line, and finally check or replace the motor. 5. AL003 (under voltage) and AL002 (over voltage) alarm, check whether the input power voltage is normal. If the external is normal, replace the drive, 6.AL001 over-current alarm, check the wiring status of the motor and the drive or whether the conductor body is short-circuited, the wiring sequence of the motor and the drive, and whether the temperature of the heat sink is abnormal. 7. AL004 motor matching abnormal alarm, check whether the motor and the drive are consistent, if it does not correspond, set the parameters of the drive to correspond to it. 8. AL031 Motor U, V, W wiring error alarm, motor POWER LINE U, V, W, GND wiring error, please connect the wires according to the color, red (U), white (V), black (W) in sequence The wire is locked on the motor output seat on the driver Lu.

Guangdong Enkong Machinery Co.,Ltd. have now decided to extend our company in other countries.

Satisfying our customers with the appropriate level of quality is a primary goal and a fundamental element as glass machine of our business mission.

glass machine has a very good repute over the global market.