The processing of plexiglass by the edger and the reasons for the uneven grinding

Plexiglass is different from the glass materials we see every day. It is very different to use a glass glass edging machine to process Plexiglass. Generally speaking, the processing methods of Plexiglass are as follows: cutting, moulding, planing, grinding Edge, laser cutting, diamond polishing, cloth wheel polishing, hot bending, silk screen, fire polishing, drilling, edge scraping, bonding and gluing assembly and packaging, etc.

Since plexiglass is a synthetic polymer material, the synthetic type is generally a plate, which is convenient for transportation and processing. Therefore, the processing of plexiglass requires the above-mentioned processes to be processed into the products we want, and plexiglass has a very Excellent permeability, so it is mostly used for product display.

Plexiglass processing is to cut or process the plexiglass sheet to the size we want, generally by laser cutting or mechanical cutting.

Most people don’t know how to make plexiglass by opening the mold. Like injection molding, it is necessary to make a special mold and then inject it into the mold with an injection molding machine according to the principle of thermoplastic molding to form the product we need.

The process of planing and edging is similar. Plexiglass trimming is generally used for planing and edging. Glass edging machines generally use mechanical planing or grinding for plexiglass sheets that have burrs or have too many excess edges. Go for some leftovers and get to the size we want and the rounded border we need.

Most people don’t know how to make plexiglass by opening the mold. Like injection molding, it is necessary to make a special mold and then inject it into the mold with an injection molding machine according to the principle of thermoplastic molding to form the product we need.

The process of planing and edging is similar. Plexiglass trimming is generally used for planing and edging. Generally, the opened plexiglass sheet has burrs or there are too many excess edges, so use mechanical methods to plan or grind off some leftovers. Achieving the size we want and the rounded border we need.

Almost all of the above mentioned are used for cutting and trimming in the front. At this time, when the precise size is required, diamond polishing is required. At this time, the size needs to be strictly controlled to prevent the assembly from being different from the design.

If the product needs to be punched, it needs to be punched with a drilling machine. Compared with glass, plexiglass has greater toughness and strength, so it can be directly machined, even if it is directly punched, but here It is necessary to control the punching machine, and it must be fixed.

The problem of level inequality in the operation of the glass straight edge grinder is that the relevant size needs to be determined according to the actual size of the glass. Then, the suitable factors of the glass edge grinder manufacturer lead to the uneven grinding of the glass machine. Specifically, it mainly includes the following aspects: .

1) Caused by the soft foundation, the unconsolidated cement foundation cannot bear the weight of the main engine itself, causing the main engine to sink, resulting in unevenness. It is necessary to ram the foundation and level the body.

2) The glass bracket feet are not fixed, and it is easy to shift when grinding large glass, resulting in a difference in level. It is necessary to correct the bracket.

3) The machine that has been used for a long time only needs to replace a small part of the block glue of the conveyor chain. The new and old block glue is used together, and the height is different, which leads to the size of the glass produced by grinding. It is necessary to replace all the block glue or simply replace the entire conveyor chain.

4) The level of the conveyor chain is uneven, and the specific reasons for this situation are mainly the conveyor chain at the end of the glass entry and the conveyor chain at the end of the glass exit. In this case, the relevant processing experience given by our company is that the first choice is to adjust the height of the guide rail at the glass end of the machine, so that the mechanical glass edging is always at the same level as the conveyor chain of the guide rail. In the process of edge, if the glass leaves the conveyor chain and turns up, then the height of the guide rail should be appropriately lowered at this time.

Glass edging machine_glass straight edge machine_glass bevelling machine_glass special-shaped machine_glass drilling machine_glass washing machine_Guangdong Enkong Machinery Co.,Ltd.
At the same time, as the recent research of Enkong shows, the benefits of improved productivity and firm performance can make implementing basic management practices worth it.
We humbly ask you to use glass machine and we guarantee that you would be in a great delight with using the product.
When it comes to glass machine glass machine manufacturer, Guangdong Enkong Machinery Co.,Ltd. is the name to reckon with. Not only are they best, they are the most experienced as well and provide wide range of services as well as products at affordable prices. Find out more information on Enkong Glass Machinery.