The improvement of glass cutting machine should be developed in the direction of convenience

In the existing process, the cutting of rectangular glass is often carried out in the horizontal and vertical directions. It is more common to cut separately and driven by a hydraulic device, so the whole operation process is very unstable and the efficiency is low, and the cutting device will It is very large, occupies a large area and consumes a lot of money, so a special glass glass cutting machine is required for it.

The rectangular glass cutting machine is installed on the ceiling by a boom, and just above the whole device is a glass conveyor belt, which will turn the glass on the right side of the glass cutting machine, start the rotating motor, and drive the The slider is rotated by the transmission block, because the front rotating rod is connected with the rectangular joint and the slider rotates, the slider can move vertically on the slider.

The rectangular glass glass cutting machine includes two fixed slide rails, a horizontal slide block and a transmission device, two parallel fixed slide rails, fixed crane towers at both ends, and hollow slide blocks at both ends of the slide block. , the hollow slider can slide on the slider group.

When the slider is rotated in place, the rotating rod will rotate when it moves back and forth in the slider, the spring ensures that the rotating rod moves more smoothly, and the trajectory of the slider ensures the left and right sides of the rectangular glass, when the slider runs When the two ends of the slider are reached, the rotating rod drives the slider to move horizontally along the direction of the slide rail to ensure the levelness of the upper and lower sides of the rectangular glass.