Talking about the working process of the glass straight-line edging machine

Talking about the operation process of the glass linear edging machine. The glass edging machine is one of the largest mechanical equipment in the deep processing of glass. It is mainly suitable for glass grinding, cutting, and grinding various special shapes. Operating the glass edging machine can not only ensure the normal operation of the machine during the production process, but also prolong the life of the machine, and it can also provide the accuracy of the processed products. The following is a brief introduction to the glass double round edge straight line glass edging machine, and I hope it will be helpful to you.

　　 The boot check before the first boot.

　　1: Is there anyone repairing the mechanical equipment when it is turned on? Whether there is an object preventing the normal operation of the equipment.

　　2: Check whether the position of the wheel groove of the glass diamond glass edging machine is within the normal range.

　　3: Check whether the belt conveying is normal, the glass guide wheel, and the conveying roller device are intact.

　　4: Check whether the water pipe or valve is leaking, and whether the water level in the water tank is within the range specified by this type of machine.

　　5: Check whether the switch button of this type of machine is intact and whether the travel switch is still the same flexible and reliable.

　　 The operating requirements after the second boot.

　　 1: According to the requirements of the glass to be processed, continue to adjust the height of the grinding wheel. As well as the depth of cutting, the quality of glass edging meets the requirements. If this is the case, the glass edging process can be continued.

　　2: Manually adjust the distance between the conveyor belts on both sides of the equipment, adjust the height of the grinding wheel, and the processing depth of the workpiece.

　　3: According to the actual requirements of the glass processing customers, click the touch screen, and set the icon to enter the set operation meeting, and input the requirements of the processing machinery.

　　 The third glass double round edge straight line edging machine must be maintained after use to keep the machine clean, which can properly ensure the quality of machined workpieces and prolong the service life of the machine.