English

(+86)757-27756688

Some precautions for starting the glass edging machine

by:Enkong     2021-03-22

1. Check the equipment before starting work, and the glass edging machine must be in normal condition. 2. Operators must wear gloves and masks or dust-proof equipment. Doors and windows in the work area should be closed to prevent silica dust from escaping. The ventilation and dust removal device must be intact and effective. 3. Precautions for the inspection of the glass edging machine before work: (1) The compression nut of the grinding wheel must not be loose;

(2) The grinding wheel must not have cracks;

(3) Safety The cover is fully assembled and reliable; (4) The front and rear, up and down transmission handles are flexible in operation, and there is no noise during operation. 4. When the steel plate is edging, the adjustment size of the grinding wheel should be strictly controlled, and the grinding amount should not be too large at a time, so as to avoid the steel plate being worn out and the grinding wheel broken. 5. If the glass edging machine fails during edging, such as the steel plate is stuck, the main switch should be turned off immediately, and the steel plate should be taken out after stopping. 6. During production, always pay attention to check whether the motor generates heat and runs abnormally. 7. Stack steel plates (especially cold-rolled plates and oil plates) neatly, not skewed, not higher than 1.2 meters and colliding with each other to avoid slipping and hurting people. 8. Feeding and transporting steel plates should be held firmly and upright, and they should not be littered to avoid injury. 9. When the ventilation and dust removal device fails, stop working or take measures. 10. After the work is finished, close the switch and do the cleaning work.

In the present growing world of emerging technology, the has demanding operation in various sectors like glass machine manufacturer, glass processing machines, glass machine manufacturer and many other industries at glass processing machines levels of manufacturing and designing.
If you cannot find the specific type of that is best for your business in the above mentioned guide, you can visit Enkong Glass Machinery for the best consultants specializing in this field, who can recommend the your are looking for. Customization is warmly welcomed here.
If we avoid overselling glass machine glass machine manufacturer and capabilities, you gain credibility and earn trust. We did not want to jeopardize our ingrained preference for humility.
Custom message
Chat Online
Chat Online
Chat Online inputting...