Introduction to the operation of the glass cutting machine

Special-shaped glass glass cutting machine is composed of body, positioning piece, measuring tool, cutting tool, worktable, etc. Its characteristic is that the base is fixed on the lower end of the arm by 4~10mm×8mm bolts, and the other end of the arm is welded with the side of the nut Casting, making the positioning screw nut pass through the arm frame, through the positioning hole, and complete the positioning by using the protractor and the positioning hole (or positioning plate) on the positioning plate and rotating the positioning plate.

This machine adopts positioning screw, positioning center, tray and movable scale plate, ruler, and can cut glass of different shapes from 2mm to 8mm, such as horizontal line, vertical line, rectangle, Right angles, triangles, circles, ellipses, arcs, etc., are widely used and are a good way to reduce material waste and save energy.

First of all, at the place where the material (glass) is to be cut, turn the hand wheel to make the center of the positioning screw drive position in place, and the dial (protractor, keyhole mark) on the dial to measure the cutting size or angle, use Position the tray support.

The positioning center is on the cutting material of any shape. The method of pushing the tool with the handle to complete the entire cutting work. If you want to know more about the relevant content, it is recommended to pay attention to this website. There will be news here every week. News updates.