How to use glass double-sided edging machine correctly

In the processing of glass products, the glass double-sided glass edging machine is one of the most important mechanical equipment in the glass deep processing equipment. The main function of the glass edging machine is to flatten the bottom edge of the glass or to grind the bottom edge into an arc shape.

For the newly purchased glass double-sided edging machine, you must read the manual carefully before use to ensure that you have a certain understanding of the glass double-sided edging machine, and figure out the transmission principle of the machine and various handles. , Handwheel, electrical buttons, waterway, airway regulating valve, after mastering the maintenance knowledge of the machine, you can operate on the machine.

First of all, the quality of the grinding head of the edging machine has a great influence on the grinding quality of the glass. The position of the grinding head and the moving gap have been adjusted before leaving the factory, except for the advance and retreat grinding heads. , The rest generally do not move, so as not to affect the grinding quality. In addition, the retreat position of the grinding head is not easy to be too large, otherwise the waterproof cover will be easily damaged, causing water leakage, and the motor will be easily burned out.

　Secondly, the continuously variable transmission used by the edging machine must be in the open state when adjusting the speed, otherwise it is easy to damage the continuously variable transmission of the edging machine.

In addition, sufficient cooling also has a greater impact on the grinding effect. Always check whether the cooling pipeline is blocked. Especially the pipeline of the linear edging machine is easy to be blocked by the bristles, and it is not easy to be noticed after blocking, which will cause insufficient cooling and affect the quality of edging.

②When there is an error or failure in the double-side grinding procedure, it is best to ask the original manufacturer to send someone to repair and debug. Under normal circumstances, do not disassemble and repair, so as not to mess up the procedure and cause the production to stop.

The above are some precautions during the use of the glass double-sided edging machine, please use the staff to see clearly.