How to set the operating speed of the glass edging machine

How to set the operating speed of the glass glass edging machine? The operating speed is something we need to master. This is what we need to know. There is a fragrance in the wall and the fragrance outside the wall. In the case of the domestic market is not promising, the overseas market It has been sought after by various manufacturers. Manufacturers in the industry have tested the international market.

A moderate increase in the cutting speed can improve the quality of the incision, that is, the incision is slightly narrower, the surface of the incision is smoother, and the deformation can be reduced. The cutting speed is too fast, so that the cutting line energy is lower than the required value. The jet in the cutting seam cannot quickly blow off the molten cutting melt immediately, resulting in a large back drag, accompanied by cutting dross, and cutting surface quality decline. When the cutting speed is too low, because the cutting site is the anode of the plasma arc, in order to maintain the stability of the arc itself, the anode spot or the anode area must find a place to conduct current near the slit closest to the arc, and at the same time, it will go to the radial direction of the jet. More heat is transferred, so the incision becomes wider. The molten material on both sides of the incision gathers and solidifies at the bottom edge, forming dross that is not easy to clean, and the upper edge of the incision becomes rounded due to excessive heating and melting. When the speed is extremely low, the arc may even go out due to the wide cut. This shows that good cutting quality and cutting speed are inseparable.

The related things of the glass edging machine are what we should master and remember. This is what we need to know. We need to operate the glass edging machine. Through the above description of how to set up the glass edging machine Knowledge about operating speed, I don’t know how much you know, it doesn’t matter if you don’t understand, you can contact us, you can continue to pay attention to our website, we wholeheartedly look forward to cooperating with you!