English

(+86)757-27756688

Glass cutting machine repair and maintenance

by:Enkong     2021-01-07
With the continuous development of science and technology, glass cutting technology and equipment has a great potential and broad market prospect. Therefore is a very popular device, the following is said to you about glass cutting machine maintenance and maintenance points, hope to useful for you. A glass cutting machine, machine work before must ensure that the laser tube is full of circulating water. Open automatic glass cutting machine into the water tank, water tank, pump and clear the dirt on the water pump. Good clean water tank clean, replace the circulating water, the water pump to restore back into the water tank, the connection pipe inserted into the inlet of the pump, tidy up the joint. 2 - the pump power alone, and running 3 minutes ( The laser tube is full of circulating water) 。 2 the use of clean, fan fan for a long time, can make the fan inside accumulate a lot of solid dust, let the fan make a big noise, in addition to flavor and is unfavorable to the exhaust. When appear insufficient suction fan smoke not free, turn off the power supply first, will be discharged into the duct and the duct on the fan, remove the inside of the dust, and then put the fan on, and pull out the inside of the blades, until clean, then put the fan installed. Three, lens cleaning ( Advice before work every day, clean equipment must be in a state of shutdown) Laser cutting machine lens edge central to rotary clean glass. No. 3, lens and focus lens from the frame, in the same way to wipe, wipe after the completion of the same back then. Note: 1. The lens should be wiped gently, do not damage the surface coating ( Metal wood coating lens more durable) ; 2. Cleaning process to should take put down gently, prevent fall; 3. Focus lens installation please be sure to keep the concave downward. The cleanness of four, guide rail, Suggest clean once every half a month, shutdown operation) Guide rail, straight axis, as one of the core parts of the equipment, it is the function of guidance and supporting role. In order to ensure the machine has high machining accuracy, to guide, linear has higher guidance precision and good processing quality of the glass cutting machine, guide rail, straight axis carefully conduct routine maintenance.
looking for the best deal while getting a quality is usually the number-one objective for most glass processing machines manufacturer.
To learn more about glass machine, give us a call at Guangdong Enkong Machinery Co.,Ltd. or visit us online by going to Enkong Glass Machinery.
glass machine manufacturer needs not be tedious anymore with the application of . So getting the right glass machine can drastically promote glass processing machines.
Custom message
Chat Online
Chat Online
Chat Online inputting...