Glass cutting machine assembly line overall explanation of the equipment
Glass cutting lines by automatic machine, automatic cutting machine and debris into a unit.
Automatic glass cutting line is mainly used for flat glass processing, can quickly, accurately and safely, cutting straight shape glass and pills.
Working process is as follows: feeding machine adopts mechanical turnover, glass raw materials through processing under vacuum cups from the materials on the shelf, fell on the feeding table.
Through the upper stage of metal and glass cutting on the conveyor belt to the cutting table.
Driven by servo motor tool high-speed movement in X, Y direction.
Use the Z axis motor rotation to control the tangent of the cutting tool path.
At the same time, through the simulation control tool cutting pressure and cutting depth.
Glass plate, after the completion of cutting through the conveyor belt and broken formation of air cushion to crushing machine automatically.
The basic working principle: it is mainly used for glass picks up.
Put the glass in the specified location, signal into slices, automatic take collet, put the glass on the roller conveyer after adsorption, automatic glass to the cutting machine on the host.
Equipment: it is mainly composed of frame institutions, flip agencies, chuck lifting mechanism, travel mechanism x axis, y axis motion mechanism, transmission mechanism, vacuum and gas circuit control system, electric control system, etc.
Detailed work steps: the whole process can be performed by PLC automatic control or manual control.
Manual mode is mainly suitable for adjustment and maintenance of the equipment.
Each action can be independently, can also be used for normal work.
Pick up signals (given chip
Manual or automatic)
And then flip and system after work.
Motor driven mechanical steering rotational clamp arm, when chuck arm reaches the same Angle as the glass, the motor stop turning.
Before the mobile motor drive chuck mobile.
Vacuum system, work begins when adsorption glass suction cups, vacuum pressure switch Settings, according to the thickness of the glass vacuum pump stops, sucker adjustable connecting rod driven by motor lift cup, about stay for a few seconds later, at this location to ensure that the single piece of glass, electric glass mechanical turnover mechanism transmission inversion mesa, telescopic landing sucker rod system and glass at the same time, the quick release chuck compressed air blown glass, transfer mechanism on the machine start to send glass stop point signal ahead.
And then the framework will automatically find zero, and then stopped, waiting for the signal of cutting machine, and then the glass will be the same as the cutting machine sent to the speed of the cutting machine.
After send out glass, glass can be automatic cycle to the program.