Enkong Glass Machinery specialized in making high-quality glass machine, glass edging machine for global customers. (+86)757-27756688

Daily cleaning of glass washing machine pay attention to details

by:Enkong     2021-04-26
1. Do not touch the emergency stop button arbitrarily in normal times, it can only be used in emergency situations. 2. The thickness of the glass plate and the height of the air knife should be adjusted in time to avoid unnecessary damage accidents. 3. The water level of the glass washing machine should be controlled between 200-250mm, and water should be added to the low position, which should not exceed this range. 4. The glass washing machine is operated by buttons, so pay attention to turn on the blower first, and then turn on the heater. Turn off the heater first, then turn off the blower. The order of operations cannot be changed. 5. When the machine is stopped, the speed regulator should be reset to avoid unnecessary trouble. 6. Pay attention to the glass discharge of the glass edging machine, because the glass discharge has a certain limit.
Introduction to the lubrication of glass edging machine
In order to prevent gear necrosis caused by excessive wear of the wear machine, the washing machine must be properly lubricated. The glass coating process has very high requirements for the cleanliness of the glass, and a small amount of lubricating oil is not allowed to enter the cleaning area, so grease with good mechanical stability and adhesion should be selected. The disc brush of the BENTELER cleaning machine adopts reciprocating rotation, butt-to-wheel butting, no bearing, and no need for lubrication. At the same time, the two ends of the conveying roller adopt water lubrication and single-sided sealed bearings, which can effectively avoid pollution. We focus on lubricating transmission chains, helical gears and transmission shafts. ①Isolate the parts that need to be lubricated from the cleaning area with a plastic sheet to avoid grease pollution. ②Lubricate the joint surface of chain, gear, drive shaft chain roller and chain plate. ③The transmission chain and roller table should be evenly lubricated. ④ Wipe off excess grease with a clean cotton cloth.
The single most important quality you'll need as Guangdong Enkong Machinery Co.,Ltd. is 'stick-to-it-iveness' or grit, a combination of perseverance, patience and adaptability.
Above all, we expect to be a credit to the communities we serve, a valuable resource to our customers, and a place where our dedicated glass machine can grow and prosper.
Forging an tight connection starts with understanding your potential customers and catering to their needs on glass machine, both with a quality product and impactful glass machine manufacturer.
A wholesaler should have many glass processing machines based products that could help you if you have a glass machine manufacturer problem. It is better to treat the problem early rather than have to deal with it later. Guangdong Enkong Machinery Co.,Ltd. is your best choice.
glass machine developed from Guangdong Enkong Machinery Co.,Ltd.’s unique skills in high technology has helped to produce glass machineglass processing machines.
Custom message
Chat Online
Chat Online
Leave Your Message inputting...